Custom metal nameplates require regular cleaning to maintain their condition and keep them looking their best. While many equipment nameplates can withstand harsh environments, they can still accumulate a lot of dirt. It’s essential to select the correct cleaning method for the metal type. Otherwise, your metal nameplate could lose its luster and stop you from displaying your business logo or required information at its best. Below, you can find out the right way to clean custom metal nameplates according to the material.

Trailer-ID-Plate

Custom Metal Nameplate Cleaning Instructions

If your metal nameplate isn’t too dirty, you can clean it with water and a mild detergent to remove light dust and grime. However, you’ll need to use other methods to clean more stubborn grease or other residues from your metal nameplate, depending on what it’s made from.

Cleaning Anodized Aluminum Custom Metal Nameplates

Anodized aluminum ID plates can withstand harsh environments and are among the easiest equipment nameplates to clean. Dishwashing soap is the best detergent to remove oil and other residues from the surface of an anodized aluminum nameplate. Once you’ve gotten the worst of the dirt off, cut a lemon in half and dip the cut side in finely ground table salt. You can use the lemon as a scrubber to remove stubborn grime and improve the nameplate’s appearance. Once you’re finished, remove any leftover salt from the anodized aluminum nameplate using a clean, dry rag and buff the surface.

Cleaning a Brass Metal Nameplate

Brass metal nameplates tarnish easily, and you’ll need to clean your metal tags regularly to keep them looking good as new. Start by wiping off as much dirt as possible using a damp rag. Next, mix half a cup of vinegar with a teaspoon of fine table salt to make a perfect solution for cleaning your metal nameplates. Gradually add plain flour until you achieve a thick consistency. Spread the mixture all over the nameplate and leave it to work for 10 minutes. Once the mixture has done its work, rinse it off and buff the surface with a clean, dry rag.

Your metal nameplates will need a polish after you’ve finished cleaning them. Toothpaste or a flour and vinegar solution make a good alternative for polishing brass metal nameplates if you don’t have a brass polish on hand.

Cleaning Bronze Custom Metal Nameplates

You can use the same method to clean bronze metal nameplates as you would for a brass nameplate. However, you’ll need to let the vinegar, salt and flour mixture work longer to get them sparkling. Aim to leave the solution on for around 30 minutes before rinsing or wiping it off and buffing with a cloth.

Cleaning Stainless Steel Metal Plates

Stainless steel is a popular material for ID tags because it can withstand harsh conditions, but you’ll still need to care for your data plates to keep them looking top-notch. You can clean stainless steel nameplates with a cloth, warm water and dishwashing soap. Adding a little ammonia to the solution can help remove caked-on grease and grime. As you scrub the plate, work in the direction of the grain to prevent scratches. Once your nameplate is clean, you can wipe it off with a damp cloth and gently buff the surface to get it shining again.

Trust the Experts

Whatever your needs, Metal Marker Manufacturing can create and deliver high-quality custom design nameplates featuring your company logo. We offer a wide range of metals, thickness choices and color options at a competitive price. Contact us today to get expert advice on cleaning your existing nameplates and discuss options for your printed business nameplates.